The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe.
The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while allowing Chevron to negotiate a resumption of operations in Venezuela, according to people familiar with the matter. Venezuela's OPPOSITION, which is backed by the United States, is understood to favor the move. Tight global oil supplies have sent crude and fuel costs soaring, threatening to add to already high inflation. Increasing Venezuelan crude exports would help ease supply constraints while also helping to reduce Europe's dependence on Russian energy.
The US has sought to encourage talks between the Venezuelan government and the US-backed opposition to open the way to free and fair elections by extending a limited license held by Chevron to allow the oil company to maintain its operations in Venezuela and negotiate future operations.
The United States reportedly did not extend a permit to Allow Chevron to drill and sell Venezuelan crude, as the company had hoped.
The license extension will allow Chevron to negotiate with State-run Petroleos de Venezuela SA, with which it has a joint venture. Previously, the company could not directly negotiate with any officials sanctioned by the United States. Chevron has been lobbying the United States to allow it to drill for Venezuelan crude and sell it on world markets to help lower energy prices amid the Russia-Ukraine war.
Affected by the ever-changing international situation, the supply and prices of many commodities like the Boron Carbide B4C powder,Overview of Boron Carbide B4C powder,Application of boron carbide B4C powder,Boron carbide B4C powder price,Boron Carbide B4C Powder Supplier are still very uncertain.
Overview of Boron Carbide B4C powder
Boron carbide (B4C) is also known as black diamond. It is gray-black and is a very hard man-made material: the Mohs hardness is 9.3, and the microhardness is 5500~6700kg/mm2, second only to diamond and cubic boron nitride.
The structure of boron carbide is hexagonal. The density of boron carbide is 2.52g/cm3. The melting point of boron carbide is 2450℃, and it decomposes and volatilizes rapidly when the temperature is higher than 2800℃.
Boron carbide B4C powder properties
Boron carbide is insoluble in water and organic solvents, has strong chemical stability, is resistant to acid and alkali corrosion, and hardly reacts with all acid and alkali solutions. The thermal neutron capture cross section of boron carbide is large and the neutron absorption ability is strong, so it is called a neutron absorber and a semiconductor.
Application of boron carbide B4C powder
Due to its attractive combination of properties, it is a suitable material for many high-performance applications.
The excellent hardness of boron carbide makes it a suitable abrasive for grinding, polishing and water jet cutting of metals and ceramics. It is suitable for grinding, polishing, drilling and other processing of various carbide tools, molds, parts, components and gemstones. Boron carbide can be made into abrasive paste and polishing paste with appropriate amount of oil or water as lubricant.
Control nuclear fission
Boron carbide can absorb a large number of neutrons without forming any radioactive isotopes. It is an ideal neutron absorber in nuclear power plants. Neutron absorbers mainly control the rate of nuclear fission. Boron carbide is mainly used in nuclear reactors as controllable rods, but is sometimes powdered due to increased surface area.
During the Chernobyl nuclear accident in 1986, Russia dropped nearly 2,000 tons of boron carbide and sand, which ultimately stopped a chain reaction within the reactor.
Because boron carbide has long been used as a rough grinding material. Due to its high melting point, it is not easy to cast into artificial products, but it can be processed into simple shapes by melting powder at high temperature. For grinding, grinding, drilling and polishing of hard materials such as carbide and gemstones.
Boron carbide can also be used as ceramic coatings for warships and helicopters. It is lightweight and has the ability to resist penetration of armor-piercing projectiles through thermocompression coatings, forming a complete defensive layer.
In the arms industry, it can be used to make gun barrels. Boron carbide, extremely hard and wear-resistant, does not react with acid and alkali, high and low temperature resistance, high pressure resistance, density ≥2.46g/cm3; microhardness ≥3500kgf/mm2, flexural strength ≥400MPa, melting point 2450℃.
Since boron carbide nozzles have the above-mentioned characteristics of wear resistance and high hardness, boron carbide sandblasting nozzles will gradually replace known cemented carbide/tungsten steel and silicon carbide, silicon nitride, alumina, zirconia and other sandblasting nozzles.
Boron carbide is also used in the manufacture of metal borides, smelting sodium boron, boron alloys and special welding.
Boron carbide B4C powder price
The price of boron carbide B4C powder will vary randomly due to factors such as production costs, transportation costs, international conditions, exchange rates, and market supply and demand of boron carbide B4C powder. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for boron carbide B4C powder, please feel free to send an inquiry to get the latest price of boron carbide B4C powder.
Boron Carbide B4C Powder Supplier
As a global supplier of boron carbide B4C powders, Tanki New Materials Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (titanium diboride, silicon hexaboride, molybdenum boride, iron boride), high-purity target materials, functional ceramics and structural devices, and provides OEM services.
|Boron Carbide Properties|
|Other Names||B4C, B4C powder, black diamond, boron carbide powder,|
|boron-carbon refractory ceramic|
|Appearance||Gray to Black Powder|
|Melting Point||2763 °C|
|Boiling Point||3500 °C|
|Solubility in H2O||Insoluble|
|Electrical Resistivity||0 to 11 10x Ω-m|
|Tensile Strength||350 MPa (Ultimate)|
|Thermal Conductivity||31 to 90 W/m-K|
|Thermal Expansion||4.5 to 5.6 µm/m-K|
|Vickers Hardness||26 Mpa|
|Young's Modulus||240 to 460 Gpa|
|Boron Carbide Health & Safety Information|
The resurgence of the global COVID-19 pandemic and the impact of the Russia-Ukraine conflict continued to cause high volatility in commodity prices. Stubbornly high inflation and rising commodity prices are likely to influence each other and thus push each other higher. The price of the Boron Carbide B4C powder,Overview of Boron Carbide B4C powder,Application of boron carbide B4C powder,Boron carbide B4C powder price,Boron Carbide B4C Powder Supplier may not decrease significantly in the short term.
Boron carbide (B4C), also known as black diamond, is gray-black and is a very hard man-made material.…
The chemical formula TiC has a molecular weight of 59.89.Grey powder,usually used for making cemented carbide,also used as electrode and abrasive of arc lamp.…
Cuprous oxide is a bright red powder, almost insoluble in water, decomposed into divalent copper and copper in acidic solution, and gradually oxidized into black copper oxide in humid air. Commonly used as a pigment, biocide and antifouling agent in…